MEASURING CONDITIONS

Before we can measure your windows and ensure accurate dimensions for manufacturing, we need certain things in place. Read here to discover the conditions required for us to measure for window treatments. 

Drapes

Ceiling to Floor-02.png

Ceiling to floor treatments

1. Sheetrock: tape and bed preferred

2. Windows: frames and glass installed

3. Finished ceilings

4. Surrounding finishes that impact treatment dimensions (i.e. molding, recessed ceilings, etc.)

Ceiling to PTAC-02.png

Ceiling to PTAC treatments

1. Sheetrock: tape and bed preferred

2. Windows: frames and glass installed

3. PTAC sleeves or units installed

4. Finished ceilings

5. Surrounding finishes that impact treatment dimensions (i.e. molding, etc.)

Wall mount treatments

1. Sheetrock: tape and bed preferred

2. Windows: frames and glass installed

3. PTAC sleeves or units installed

4. Surrounding finishes that impact treatment dimensions (i.e. molding, etc.)


Shades

Outside Mount-02.png

Outside mount

1. Sheetrock: tape and bed preferred

2. Windows: frames and glass installed

3. Surrounding finishes that impact treatment dimensions (i.e. molding, recessed ceilings, etc.)

Inside Mount-02.png

inside mount

1. Sheetrock: tape and bed preferred

2. Windows: frames and glass installed with jambs in final conditions

3. Surrounding finishes that impact treatment dimensions (i.e. molding, cranks, etc.)


Notes:

  1. Carpet or LVT flooring does not need to be down prior to measure.

  2. If any of the above conditions are not in place at the time of measure, we may need a subsequent measure trip, resulting in additional costs.



The qc team.png