CUBICAL CURTAINS | RESOURCE

Cubicle Curtains have many different components—interestingly, these can change based on the style you're wanting. Check out this new resource to learn more about these components.

Track-03.png
 

HARDWARE TRACK

Cubicle curtain hardware has a hook system to put the curtains in place, cubicle curtains do not have any hardware attached to them, besides the grommets. This allows for the curtains to be taken down as often as needed f or laundering.


 

DROP CHAIN

Typically used to accommodate very high ceilings, it is a cost effective solution to standardize cubicle curtains across your facility.

Drop Chain-03.png

Grommets-03.png
 

GROMMETS

Round, metal-rimmed openings placed every 6 inches along the top of the cubicle curtain for the hooks to go through and connect to the track.


 

QC SNAP

This snap system can be used with any width of track and mesh. Each panel finishes at 66”w x 66”l, and multiple panels can be snapped together if track length exceeds 66”.

QC snap-03.png

Mesh-03.png
 

MESH

In order to meet fire regulations and allow ventilation in the room, cubicle curtain mesh is 20”-22” long (ask your manufacturer about custom lengths). This lock knit mesh is made of 100% polyester and has 1/2” openings throughout.


 

FABRIC

We recommend fabrics that inherently meet NFPA 701 for optimum performance. Railroading cubicle fabric is the same as railroading drapery fabric or sheers. See our Railroading Resource Card for more information.

Fabric-03.png

We hope this information was helpful. Don’t forget to download the Resource Card to keep this content handy! Until the next post…


the qc team-01.png